The aluminium industrial wind extractor allows to generate a ventilation system with a permanent renewal of air 24 hours a day without the need to consume electricity. The industrial wind extractor or vent is designed to resist winds of up to 20 km/h and offer high performance and durability.
The aluminum wind extractor is an ecological solution since it works thanks to the use of wind energy and the difference in pressure between the interior and exterior of the building (Venturi effect). In addition, its manufacture in aluminum (a 100% recyclable metal) helps to reinforce the circular economy model.
Comparison of the TAS aluminum industrial wind extractor to other manufacturers
Unlike other manufacturers, the wing system of the TAS aluminium industrial wind extractor is made in one piece together with the upper plate without the need for rivets, avoiding any breakage and considerably increasing its durability. In addition, it is supplied with a 3-wind kit for a more secure fixing that guarantees its full performance even with strong gusts of wind.
Another fundamental aspect to take into account when choosing an industrial wind extractor is the quality of the bearings used. The bearings are a key part for the durability of this solution and to avoid breakage or deterioration. The TAS industrial wind extractor has bearings (type S 6002-2RS SNR) made entirely of stainless steel and in addition, it is double fastened at the bottom to guarantee a robust and durable system.
Main advantages of the aluminum industrial wind extractor
Some of the main characteristics of aluminum industrial wind extractors are:
• Constant ventilation 24 hours a day • Completely ecological with zero electricity consumption • Does not generate noise, helping to maintain a better environment in the workplace. • Its lightness greatly facilitates its installation
These extractors are used in various industries, such as warehouses, factories, workshops, production plants, among others, where efficient and constant ventilation is required.
Extraction capacity of the industrial wind extractor
The industrial wind extractor can be manufactured with a neck of 400 mm or 500 mm in diameter and can reach 4,700 m^3/h of extraction flow, which makes it a great ally to achieve an adequate renovation of a space.
However, it is essential to bear in mind that, in order to achieve proper ventilation, the balance between air inlets and outlets must be studied, taking into account the volume of the building and, of course, the activity that takes place inside. Below we leave you this short video so that you can see the TAS aluminium industrial wind extractor working at full capacity on the roof of this industrial warehouse:
Experts in static ventilation systems for industrial buildings
At TAS we have been advising and manufacturing solutions for the ventilation of industrial buildings for more than 15 years. We offer personalized advice, as well as the possibility of carrying out a ventilation study based on the characteristics of the building, such as the height from the ground to the roof or the difference in temperature with the outside. If you need advice on the ventilation of your industrial warehouse, do not hesitate and contact us now.
Contacta con nuestros técnicos para más información sobre nuestros productos y servcios.
Do not miss this article published by Ecoconstruccion magazine on the latest architectural facade project where TAS has participated We are very happy to announce that the magazine Ecoconstruction in its montly publication has collected the details of the project in which we participated last year 2022 with the supply of more than 15,000 m2 […]
Discover in this post what type of paint your metallic facade should have That's how it is! As you already know, the salinity of the sea is very aggressive against most of the materials that are used. At TAS we know how important this is and when to use solutions that are prepared for these […]
Discover the solution offered by TAS for this translucent metal parapet project installed on a metallic facade This office building needed a translucent parapet for the window of the front metallic facade. Specifically, it had to be a durable material, with minimal maintenance, and keeping the aesthetics and elegance of the facade. Architectural steel solutions […]
Architectural profile recently developed - don't miss it out! We bring you news about an architectural facade profile that we have recently developed and that we love: It is the Cabrera Facade Profile. Some of its main features are: It has up to 25 bends and has a wide range of dimensions with angles and […]
Learn more about the different modulating options offered by this new metal facade profile. Without a doubt, the most versatile profile ever designed. TAS is defined by the flexibility of its production process and by its innovative and avant-garde spirit. For this reason, at TAS we are pleased to be able to launch the Mallorca […]
This colorful facade matches its location, San Juan de Alicante, where the exterior facade of the Carrefour shopping center has been completely renovated, using a composite panel resource together with these perforated and post-lacquered steel trays. One of the latest projects in which TAS has participated with the supply of its Architectural Tray has been […]
How far do you think we can go to meet the demands of our customers in the manufacture of customized decorative sheets for metallic facades? We recently received a query about our Menorca profile, as it was the architectural profile chosen for a decorative border on the main facade of a residential building. Both the […]
If you have come this far, you probably know what a ventilated facade consists of. However, we will start by reviewing the concept: The metallic ventilated facade is an increasingly used constructive solution whose ultimate goal is the elimination of the thermal bridge to generate excellent insulation between the external conditions and the interior of […]
Sandwich sheet and sandwich panel are terms used in the construction and engineering industry to describe composite structures. Although both terms refer to internal and external skin panel systems, there are some differences between them. The sandwich sheet refers to a type of structure composed of two rigid external layers (usually metal) with an intermediate […]
The Plaza Europa office tower wich stands amongst the heights of Barcelona is a 22 storey building with an outstanding aluminium facade, provided by TAS . This construction has been built under the principles of sustainability , which would mean a leed Platinum certification. Conception of an aluminum and glass facade This 22-story tower designed […]
Strictly necessary cookies
Strictly necessary cookies must always be enabled so that we can save your cookie settings preferences.
If you disable this cookie we will not be able to save your preferences. This means that each time you visit this website you will have to enable or disable cookies again.
Third party cookies
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, or the most popular pages.
Leaving this cookie active allows us to improve our website.
Please enable strictly necessary cookies first so that we can save your preferences!